• HY495 Instant Adhesive

    HY495 Instant Adhesive

    This product is a single component, the main component is a-cyanoacrylate, 100% pure reactive monomer, it cures instantly when exposed to moisture in the air, and the bonding takes only a few seconds to a few minutes (depending on the material to be bonded or the ambient temperature) different). It’s no need to heat, easy to use, high bonding strength, and excellent flexibility. It’s s uitable for self-adhesive and mutual adhesion of rubber, plastic, glass, porcelain, metal, etc., with good temperature resistance, water resistance and oil resistance. Packing specification

    Send Emaildetail
  • HY496bonding metal Glue Instant Adhesive Super Glue

    HY496bonding metal Glue Instant Adhesive Super Glue

    This product is a single component, the main component is a-cyanoacrylate, 100% pure reactive monomer, it cures instantly when exposed to moisture in the air, and the bonding takes only a few seconds to a few minutes (depending on the material to be bonded or the ambient temperature) different). It’s no need to heat, easy to use, high bonding strength, and excellent flexibility. It’s s uitable for self-adhesive and mutual adhesion of rubber, plastic, glass, porcelain, metal, etc., with good temperature resistance, water resistance and oil resistance.

    Send Emaildetail
  • HY515General-Purpose Anaerobic Gasket Sealants

    HY515General-Purpose Anaerobic Gasket Sealants

    The gap seal between the planes usually uses a solid gasket. Due to the roughness of the plane processing and the influence of the tool marks, it is uneven in the microscopic view. It is impossible for the solid liner to 100% fit the processing surface. The solid liner is aging due to temperature, medium, and mechanical force, causing looseness and leakage. Huayu series of plane sealants are single-component glues with good medium resistance, no shrinkage during curing, 100% full gaps, flexibility and shock resistance, and no leakage or leakage after long-term use.

    Send Emaildetail
  • HY518Special industrial plane sealant for aluminum parts

    HY518Special industrial plane sealant for aluminum parts

    The gap seal between the planes usually uses a solid gasket. Due to the roughness of the plane processing and the influence of the tool marks, it is uneven in the microscopic view. It is impossible for the solid liner to 100% fit the processing surface. The solid liner is aging due to temperature, medium, and mechanical force, causing looseness and leakage. Huayu series of plane sealants are single-component glues with good medium resistance, no shrinkage during curing, 100% full gaps, flexibility and shock resistance, and no leakage or leakage after long-term use Main Products and Uses

    Send Emaildetail
  • HY516High quality pipe thread sealant

    HY516High quality pipe thread sealant

    Pipe threads are usually sealed with PTFE tape. Raw tape is a kind of solid filler, which cannot fill the gap and has poor shock resistance. When screwing in, the rubber thread is easy to break and block the pipeline. After screwing in, the angle cannot be adjusted, which is easy to cause leakage and loosening. Huayu series pipeline thread sealant is a single-component liquid, which can completely fill the thread gap without clogging the pipeline. It does not contain solvents, does not shrink during curing, can adjust the angle during assembly, has good media resistance, and completely solves the problem of pipeline thread sealing leakage.

    Send Emaildetail
  • HY570Pipe thread sealant

    HY570Pipe thread sealant

    HY570 pipeline thread sealant is an anaerobic adhesive. The pipeline sealant has excellent properties such as medium viscosity, general purpose and high strength.

    Send Emaildetail
  • HY597 Silicone Rubber Flat Sealant

    HY597 Silicone Rubber Flat Sealant

    The gap seal between the planes usually uses a solid gasket. Due to the roughness of the plane processing and the influence of the tool marks, it is uneven in the microscopic view. It is impossible for the solid liner to 100% fit the processing surface. The solid liner is aging due to temperature, medium, and mechanical force, causing looseness

    Send Emaildetail
  • HY460Special instant adhesive for rubber and plastic bonding

    HY460Special instant adhesive for rubber and plastic bonding

    This product is a single component, the main component is a-cyanoacrylate, 100% pure reactive monomer, it cures instantly when exposed to moisture in the air, and the bonding takes only a few seconds to a few minutes (depending on the material to be bonded or the ambient temperature) different). It’s no need to heat, easy to use, high bonding strength, and excellent flexibility. It’s suitable for self-adhesive and mutual adhesion of rubber, plastic, glass, porcelain, metal, etc., with good temperature resistance, water resistance and oil resistance.

    Send Emaildetail
  • HY413Acrylic Structural Adhesive

    HY413Acrylic Structural Adhesive

    This product is a two-component flexible acrylate adhesive with high bonding strength and good media resistance. Suitable for self-adhesion and mutual adhesion of materials such as metal, glass, ceramics, hard rubber, cement, plastic, wood, carbonate, polystyrene, etc.

    Send Emaildetail
  • HY517liquid pipeline thread sealants

    HY517liquid pipeline thread sealants

    Pipe threads are usually sealed with PTFE tape. Raw tape is a kind of solid filler, which cannot fill the gap and has poor shock resistance. When screwing in, the rubber thread is easy to break and block the pipeline. After screwing in, the angle cannot be adjusted, which is easy to cause leakage and loosening. Huayu series pipeline thread sealant is a single-component liquid, which can completely fill the thread gap without clogging the pipeline. It does not contain solvents, does not shrink during curing, can adjust the angle during assembly, has good media resistance, and completely solves the problem of pipeline thread sealing leakage.

    Send Emaildetail
  • HY411 Epoxy Structural Adhesive

    HY411 Epoxy Structural Adhesive

    This product is a two-component flexible epoxy resin adhesive with high bonding strength and good media resistance. Suitable for self-adhesion and mutual adhesion of materials such as metal, glass, ceramics, hard rubber, cement, plastic, wood, carbonate, polystyrene, etc. The adhesive layer has good toughness, low stress on the glued parts, and excellent overall performance. It can be widely used in equipment assembly and maintenance in metallurgy, machinery, electric power, petrochemical, railway, automobile, instrumentation and other industries.

    Send Emaildetail
  • HY598Automotive engine gasket glue

    HY598Automotive engine gasket glue

    The gap seal between the planes usually uses a solid gasket. Due to the roughness of the plane processing and the influence of the tool marks, it is uneven in the microscopic view. It is impossible for the solid liner to 100% fit the processing surface. The solid liner is aging due to temperature, medium, and mechanical force, causing looseness and leakage. Huayu series of plane sealants are single-component glues with good medium resistance, no shrinkage during curing, 100% full gaps, flexibility and shock resistance, and no leakage or leakage after long-term use.

    Send Emaildetail
  • HY609viscosity Retaining Compound for Cylindrical Parts

    HY609viscosity Retaining Compound for Cylindrical Parts

    The anaerobic cylindrical parts retaining agent is a single-component glue that can fill the matching gap 100%, does not shrink during curing, has good medium resistance, and completely solves the problem of loosening and leakage of cylindrical matching parts. At the same time, the use of the retaining agent can replace the interference and transitional fits with clearance fits, which can effectively prevent the deformation caused by the transitional fits.

    Send Emaildetail
  • HY620High viscosity Retaining Compound for Cylindrical Parts

    HY620High viscosity Retaining Compound for Cylindrical Parts

    The anaerobic cylindrical parts retaining agent is a single-component glue that can fill the matching gap 100%, does not shrink during curing, has good medium resistance, and completely solves the problem of loosening and leakage of cylindrical matching parts. At the same time, the use of the retaining agent can replace the interference and transitional fits with clearance fits, which can effectively prevent the deformation caused by the transitional fits.

    Send Emaildetail
  • HY401 all-purpose strong instant adhesive

    HY401 all-purpose strong instant adhesive

    Jiagu (Ruilangda) HY401 instant-drying super glue is a one-component, easy-to-use instant glue with a wide range of bonding and high bonding strength.

    Send Emaildetail
  • HY226Corrosion resistant repair glue

    HY226Corrosion resistant repair glue

    HY226 wear-resistant and anti-corrosion repairing agent is a kind of cement-like repairing agent. The corrosion-resistant repairing agent can be widely used in the pre-protection of corroded pumps, valves, vanes, pipelines, heat exchanger filter plates, acid-base storage tanks and reaction kettles. Coating, etc. repairs.

    Send Emaildetail
  • HY225Wear-resistant and anti-corrosion repair glue

    HY225Wear-resistant and anti-corrosion repair glue

    HY225 wear-resistant and anti-corrosion repairing agent is a brushable ceramic repairing agent. Pre-protective coating and other repairs.

    Send Emaildetail
  • HY218Impact-resistant and wear-resistant repair glue

    HY218Impact-resistant and wear-resistant repair glue

    HY218 wear-resistant and anti-corrosion repairing agent contains hard alumina ceramic beads. HY218 wear-resistant repairing agent can be widely used in the repair of worn parts of pumps, pipes, feeders and other parts that resist high-load ...

    Send Emaildetail
  • HY216Wear-resistant and anti-corrosion repair glue

    HY216Wear-resistant and anti-corrosion repair glue

    HY216 wear-resistant repair agent contains fine-grained ceramic beads, and the wear resistance is 48 times that of ordinary cast iron. The wear-resistant and anti-corrosion repair agent can be widely used in the repair and pre-protection coating of the worn parts of the pump, impeller, feeder and other parts of erosion and cavitation.

    Send Emaildetail
  • HY215Wear-resistant repair agent

    HY215Wear-resistant repair agent

    HY215 wear-resistant repair agent alloy repair material, the wear resistance is 23 times that of medium carbon quenched steel. It is used for accurate repair of friction and wear failures of shafts, shaft holes, rubber keyways and other parts. ​​​​

    Send Emaildetail
Get the latest price? We'll respond as soon as possible(within 12 hours)What do you wish to enquire about?
click it to change
  • Helen:+8615093235871